Language: | Currency:
Product
White Primer #315

White Primer #315

$83.95

SKU: AA-201-01

ON GUARD™ White Primer #315 is a high quality shop or field primer specifically formulated for ON GUARD Acid Detecting and ON GUARD Base Detecting products.  This primer will serve most of your priming needs.  ON GUARD is strongly recommended over other primers because there have been cases where inferior primers have dissolved and their pigment color has bled into the top coat. ON GUARD exhibits good rust preventative and excellent adhesion properties ideal for thin film coating.

Available Size: 1 gallon (3.79 L)

Full Specifications

SURFACE PREPARATION: Hand tool cleaning (SSPC-SP2) or power tool cleaning (SSPC-SP3) for normal requirements.

SURFACE TEMPERATURE: Minimum 40 °F (4 °C) / Maximum 120 °F (49 °C)
SUGGESTED THINNING: For air spray, thin up to 10%. For airless sprayer, brush or roller, thin up to 5%. Use VM&P Naptha.
MIXING: Stir thoroughly, making sure no pigment remains on the bottom of the container.

APPLICATION EQUIPMENT: Air or airless spray, brush or roller.
SPREADING RATE: Allow for overspray and irregularities. Application of coating below minimum or above maximum dry mil thickness recommended may adversely affect coating performance. Film thickness is based on the closest 0.5 mil.
STORAGE TEMPERATURE: Minimum 20 °F (-7 °C)/Maximum 110 °F (43 °C).
SHELF LIFE: One year in the factory-sealed can at the above storage temperature
CLEAN UP INSTRUCTIONS: Clean all equipment immediately after use with VM&P Naptha. Flush and clean spray equipment before material dries.
View Physical Characteristics and Curing Time
View Additional Specifications
View Air Spray Specifications (includes suggested equipment, or equivalent. Note: Low temperature or longer hoses require higher pot pressure)
View Airless Spray Specifications (Note: Use appropriate tip and atomizing pressure for equipment, applicator technique and weather conditions)